Technische Specificaties Materialen (volledig)
PLA
PETG
ASA
TPU
PA6-GF
PAHT-CF
PPA-CF
PPS-CF
PC
PVA
PLA
Properties
Bambu Lab has tested the differing aspects in the performance of PLA Basic material, including physical, mechanical, and chemical properties. Typical values are listed as followed:
Physical Properties
| Subject | Testing Method | Data |
|---|---|---|
| Density | ISO 1183 | 1.24 g/cm³ |
| Melt Index | 210 °C, 2.16 kg | 23.2 ± 3.5 g/10 min |
| Melting Temperature | DSC, 10 °C/min | 160 °C |
| Glass Transition Temperature | DSC, 10 °C/min | 60 °C |
| Crystallization Temperature | DSC, 10 °C/min | N / A |
| Vicat Softening Temperature | ISO 306, GB/T 1633 | 57 °C |
| HDT (1.8 MPa) | ISO 75 | 54 °C |
| HDT (0.45 MPa) | ISO 75 | 57 °C |
| Water Absorption (Saturated) | 25 °C, 55% RH | 0.43% |
Mechanical Properties
| Subject | Testing Method | Data |
|---|---|---|
| Young’s Modulus (X-Y) | ISO 527, GB/T 1040 | 2580 ± 220 MPa |
| Young’s Modulus (Z) | ISO 527, GB/T 1040 | 2060 ± 170 MPa |
| Tensile Strength (X-Y) | ISO 527, GB/T 1040 | 35 ± 4 MPa |
| Tensile Strength (Z) | ISO 527, GB/T 1040 | 31 ± 3 MPa |
| Elongation at Break (X-Y) | ISO 527, GB/T 1040 | 12.2 ± 1.8% |
| Elongation at Break (Z) | ISO 527, GB/T 1040 | 7.5 ± 1.3% |
| Bending Modulus (X-Y) | ISO 178, GB/T 9341 | 2750 ± 160 MPa |
| Bending Modulus (Z) | ISO 178, GB/T 9341 | 2370 ± 150 MPa |
| Bending Strength (X-Y) | ISO 178, GB/T 9341 | 76 ± 5 MPa |
| Bending Strength (Z) | ISO 178, GB/T 9341 | 59 ± 6 MPa |
| Impact Strength (X-Y) | ISO 179, GB/T 1043 | 26.6 ± 2.8 kJ/m²; 7.9 ± 1.2 kJ/m² (notched) |
| Impact Strength (Z) | ISO 179, GB/T 1043 | 13.8 ± 0.9 kJ/m² |
Other Physical and Chemical Properties
| Subject | Data |
|---|---|
| Odor | Odorless |
| Composition | PLA |
| Skin Hazards | No hazard |
| Chemical Stability | Stable under normal storage and handling conditions |
| Solubility | Insoluble in water |
| Resistance to Acid | Not resistant |
| Resistance to Alkali | Not resistant |
| Resistance to Organic Solvent | Not resistant to some organic solvents |
| Resistance to Oil and Grease | Resistant to most kinds of oil and grease |
| Flammability | Flammable |
| Combustion Products | Water, carbon oxides |
| Odor of Combustion Products | Odorless |
PETG
Bambu PETG combineert de eenvoud van PLA met de robuustheid van ABS. Het biedt uitstekende chemische bestendigheid, flexibiliteit en UV-bestendigheid. Geschikt voor functionele onderdelen, outdoor toepassingen en waterdichte modellen.
Fysische Eigenschappen:
Dichtheid: 1.27 g/cm³
Vicat: 80 °C
Hittebestendigheid: ~70 °C
Mechanische Eigenschappen:
Treksterkte: 50–60 MPa
Slagvastheid: 20 kJ/m²
